Feiyu Tech FY MiNi2D 2-Axis Brushless Gimbal For Gopro4 Gopro3+ Gopro3 Sport Camera

Description:

åÊ Minimum Standard Maximum Remark
Working Voltage 7.0V 8.4V 14.0V åÊ
Static attitude tracking accuracy 0.01 0.02 0.05 Gimbal static mode
Motion attitude tracking accuracy 0.1 0.2 0.5 Motor overload less than 2G
Motor overload protection current åÊ 800mah åÊ åÊ
Pitch angle -150å¡(down) 0å¡(horizontal) +150å¡(up) åÊ
Roll angle -45å¡ 0å¡(horizontal) +45å¡ åÊ
Heading angle -120å¡ åÊ +135å¡ åÊ
Pitch following rate 2å¡/sec åÊ 25å¡/sec åÊ
Heading following rate 3å¡/sec åÊ 75å¡/sec åÊ
Weight : åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ åÊ110g (Not included camera)
Features:
LighteråÊweight,higheråÊconvenience,betteråÊperformanceåÊquality
EasyåÊinstallation,simplyåÊconnectåÊtoåÊtheåÊpoweråÊsupplyåÊthatåÊcanåÊworkåÊindependently
Suit foråÊGopro4åÊGopro3+åÊGopro3åÊSportåÊCamera
GimbalåÊinitialization method:
The gimbal is placed,remain stationary,then turn on the power,wait gimal operation,after operating,you can pick up the gimbal to work.
The gimbal needs to be initialized when the following situations occur:
-After starting,there is aåÊsmall angle deviation between pitch angle and the horizontal.
-There is aåÊsmall angle deviation between roll angle and the horizontal.
-Keeping headingåÊstationary,heading angle has frequent small angle correction.
Products Caution:
1.Please after installing the Goprp camera ,open the power.
2.Be sure to use the USB conversion head when you connect it to the computer for upgrading firmware,
3.First time using,turn on the power of gimbal,remain gimbal stationary,wait that gimbal initialization is completed,automatically back the gimbal to the horizontal position,it can be used normally,you needn't setting and adjusting parameters.
Package Included:
1x MiNi 2-axis gimbal

Recently Viewed Items