Matek Mini Power Hub Power Distribution Board With BEC 5V And 12V For FPV Multic
Matek Mini Power Hub Power Distribution Board With BEC 5V And 12V For FPV Multic

Type: Charger
Vendor: Matek

Description:

Description:
- Band name: Matek
- Item name:åÊ
MatekåÊPower Distribution Board
- Dimensions: 36 x 36mm
- Weight: About 6gåÊ
- Mounting holes 30.5mm square spacing
Features:

- 2oz copper & 4-layers PCB.
- ESC & Battery solder tabs in pairs.
- Solder Bridges of various voltage for Camera & VTX.
- DC/DC synchronous buck regulator, Efficiency is up to 95%.
- TVS(Transient Voltage Suppressor) protection for DC/DC chip.
- 5V & 12V Output LED indicators & Short circuit tolerant.
Specification:
General:
- Input voltage range (2S-6S operation): 7.2 - 26VDC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 4 ESC outputs
ESC outputs:

- Continuous current: 20A per output
- Peak current (10 seconds/minute): 30A per output
BEC 5V output:

- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 3 AmpsåÊåÊåÊåÊåÊåÊåÊåÊåÊåÊåÊåÊåÊåÊåÊ
- Short-circuit tolerant (10 seconds/minute)
- LED (indicates voltage is in regulation, within 10%)
BEC 12V output:

- The battery should be 4S~6S LiPo
- Standard output designed to power cameras and video transmitters,etc.
- Voltage: 12.0 +/- 0.2VDC
- Continuous current: 2 Amps (Max.3A 10s/minute)
- Short-circuit tolerant (10 seconds/minute)
- LED (indicates voltage is in regulation, within 10%)
CAM & VTX voltage bridge

- 3S operation. choose ‰ÛÏVCC‰۝ for 12V camera & 12V VTX,åÊ VCC=Battery Voltage.
- 4~6S operation, choose ‰ÛÏ12‰۝ for 12V camera & 12V VTX
- 3~6S operation, choose ‰ÛÏ5‰۝ for 5V camera
- Video pass through from the ‰ÛÏCAM‰۝ pad to the ‰ÛÏVTX‰۝ pad

Package Included:


1 xåÊMatek Mini Power Distribution Board

Recently Viewed Items